 |
 |
|
Home | About Fibridge | Clients | Support | Contact Us |
||
Models
10 / 100M Ethernet over 1E1 Converter
100Base-TX/FX to 1-8 E1 Protocol Converter Series
10 / 100M Ethernet over 1E1
1.Overview
FBPC100 Series Protocol Converter IS A High Performance, Remote, Self-Learning Ethernet Bridge Its Low cost Compact size and the make IT Ideal for cost-sensitive Bridging Applications or AS A 'bit over the LAN Extender Stream of the type Infrastructures at The main.. E1 link may be clocked from the recovered receive clock or from an internal oscillator. This converter allows transmitting and receiving VLAN data packets. Standalone and Rack mount module are both available.
2.Features
Supports transparent / fractional the E1 Channel
10 / 100M Ethernet Electrical Port
Support bandwidth couple, and the Test Loop Clock TWO Resources, etc
MDI / X-the MDI-Auto-Crossover, 10 / 100M Auto-negotiation and Speed Limitation
AC220V and DC- 48V power supply redundant
3.Management
Management Console provided
Upgraded to the SNMP / the WEB Management
the View and the Configure the E1 and Ethernet the ports at The Status, SUCH AS summary of the Framed and unframed MODE Setting the E1, E1 Loop Back, the ports Ethernet Rate Limitation, etc. and
Provide the Parameter Monitoring Environment, Including Power Device Status and Operation temperature Supply's
Provide to the User Management of Ensure at The Device Security Operation
4.Power Specifications
4.1Power
the AC the Input: 100 ~ 240V
the DC the Input: -48 V
the Power Consumption:
≤3W Interface 4.2E1
the Data Rate: N × 64Kbps, N = 1 ~ 32
Code of the type: HDB3
Compliant the with G.703, G.704, G.706 and G.823
75/120 optional
the BNC (75ohm) / the RJ45 (120ohm)
Transparent / fractional optional
4.3 Ethernet Connections
Standard:. The IEEE 802.3, 802.3u
10 / 100M Electrical Port,
the MDI / MDIX Auto negotiation
Half / Full Duplex
the RJ45 Connector
Qty: 1
4.4 Environment
the Operation Temperature: 0 ~ 50
the Operation the Relative Humidity viewer: 20 ~ 90%
Store Temperature: -20 ~ 65
Store the Relative Humidity viewer: 10 ~ 95%
Order Information
F4-51A 10 / 100M Ethernet over 1E1 Converter, Standalone, AC220V Power Supply's
F4-51D 10 / 100M Ethernet over 1E1 Converter, Standalone, the DC-48V Power Supply's
F4-51M 10 / 100M Ethernet over 1E1 converter, Module card, AC220V / DC-48V power
10/100M Ethernet over 4E1
1.Overview
FBPC100 Series protocol converter is a high performance, remote, self-learning Ethernet Bridge. Its compact size and low cost make it ideal for cost-sensitive bridging applications or as a LAN extender over bit stream type infrastructures. The main E1 link may be clocked from the recovered receive clock or from an internal oscillator. This converter allows transmitting and receiving VLAN data packets. Standalone and Rack mount module are both available.
2.Features
Support transparent E1 channel
Provide 10/100M electrical Ethernet port
Support loop test, CRC selection, local/remote indicators etc.
Auto-detect the valid E1 channels and auto-balance the data flow among the valid E1 channels
MDI/MDI-X auto-crossover, 10/100M auto-negotiation and speed limitation
AC220V and DC-48V power supply redundant
3.Management
Provide console management
Upgraded to SNMP/WEB management
View and configure the E1 and Ethernet ports status, such as E1 loop back, Ethernet ports rate limitation, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Provide user management to ensure the device operation security
4Specifications
4.1Power
AC Input: 100~240V
DC Input: -48V
Power Consumption:
≤15W
4.2E1 interface
Data rate: 2.048Mbps
Code type: HDB3
Compliant with G.704, G.823
75/120 optional
BNC (75ohm)/RJ45 (120ohm)
Transparent E1 mode
Qty: 4/8/16
4.3Ethernet Interface
Standard: IEEE 802.3, 802.3u.
10/100M electrical port, MDI/MDIX auto negotiation
Half/ full duplex
RJ45 connector
Qty: 1/4
4.4Environment
Operation Temperature: 0~50
Operation Relative Humidity: 20~90%
Store Temperature: -20~65
Store Relative Humidity: 10~95%
Order Information
P/N Description
F5-4513A 10/100M Ethernet over 4E1 converter, Standalone, AC220V power supply
F5-4513D 10/100M Ethernet over 4E1 converter, Standalone, DC-48V power supply
F5-4513M 10/100M Ethernet over 4E1 converter, Module card, AC220V/ DC-48V power supply
F5-8513A 10/100M Ethernet over 8E1 converter, Standalone, AC220V power supply
F5-8513D 10/100M Ethernet over 8E1 converter, Standalone, DC-48V power supply
F5-8513M 10/100M Ethernet over 8E1 converter, Module card, AC220V/ DC-48V power supply
F5-16513A 10/100M Ethernet over 16E1 converter, Standalone, AC220V power supply
F5-16513D 10/100M Ethernet over 16E1 converter, Standalone, DC-48V power supply
1E1 over IP converter
1.Overview
With the advanced technology on clock recovery, F5-23x5 series TDM over IP converters achieve TDM signal transmission over the IP network. The device provides 1 to 4 framed and unframed E1 channels, and 1 traditional Ethernet data port. It is widely used with wireless LAN.
2.Features
Transmission 1 to 4 framed & unframed E1 channel and 1 traditional Ethernet data over IP network
Advanced technology on clock recovery and data buffering making TDM signal transmission with high efficiency and without loss
Four clock resources option brings stability and flexibility
E1 signal transmitted on the IP network with QoS guarantee
Transmitted package based on the IP address, through switches, router and other IP network equipment
Configurable package size and delay time making it adaptive for various network environments
MDI/MDI-X auto-crossover, 10/100M auto-negotiation and speed limitation supported on both UPLINK port and local Ethernet data port
3.Management
Provide console management
Upgraded to SNMP/WEB management
View and configure the E1 and Ethernet ports status, such as E1 framed and unframed mode setting, E1 loopback, Ethernet ports rate limitation, clock resources selection, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Provide user management to ensure the device operation security
4.Specifications
Power
AC Input: 100~240V
DC Input: -48V
Power Consumption: ≤15W
E1 ports
Compliant with: ITU-T G.703, G.704, G.823
Rate: 2.048Mbps ?50ppm
Code type: HDB3
Impedance: 75 ohm unbalanced & 120 ohm balanced
Physical connector: BNC for unbalanced & RJ45 for balanced
Ethernet ports
Compliant with: IEEE802.3, 802.3u, 802.3x, Rate: 10/100Mbps auto-negotiation, Duplex: Half/Full auto-negotiation, Physical connector: RJ45
5.Environment
Operation Temperature: 0~50℃
Operation Relative Humidity: 20~90%
Store Temperature: -20~65℃
Store Relative Humidity: 10~95%
6.Dimension
483mm(W) * 200mm(D) * 44.5mm(H)
Order Information
P/N Description
F5-2315A 1E1 over IP converter, Standalone, AC220V power supply
F5-2315D 1E1 over IP converter, Standalone, DC-48V power supply
F5-2325A 2E1 over IP converter, Standalone, AC220V power supply
F5-2325D 2E1 over IP converter, Standalone, DC-48V power supply
F5-2345A 4E1 over IP converter, Standalone, AC220V power supply
F5-2345D 4E1 over IP converter, Standalone, DC-48V power supply
10 / 100M Ethernet over 1E1 Converter
1.Overview
FBPC100 Series Protocol Converter IS A High Performance, Remote, Self-Learning Ethernet Bridge Its Low cost Compact size and the make IT Ideal for cost-sensitive Bridging Applications or AS A 'bit over the LAN Extender Stream of the type Infrastructures at The main.. E1 link may be clocked from the recovered receive clock or from an internal oscillator. This converter allows transmitting and receiving VLAN data packets. Standalone and Rack mount module are both available.
2.Features
Supports transparent / fractional the E1 Channel
10 / 100M Ethernet Electrical Port
Support bandwidth couple, and the Test Loop Clock TWO Resources, etc
MDI / X-the MDI-Auto-Crossover, 10 / 100M Auto-negotiation and Speed Limitation
AC220V and DC- 48V power supply redundant
3.Management
Management Console provided
Upgraded to the SNMP / the WEB Management
the View and the Configure the E1 and Ethernet the ports at The Status, SUCH AS summary of the Framed and unframed MODE Setting the E1, E1 Loop Back, the ports Ethernet Rate Limitation, etc. and
Provide the Parameter Monitoring Environment, Including Power Device Status and Operation temperature Supply's
Provide to the User Management of Ensure at The Device Security Operation
4.Power Specifications
4.1Power
the AC the Input: 100 ~ 240V
the DC the Input: -48 V
the Power Consumption:
≤3W Interface 4.2E1
the Data Rate: N × 64Kbps, N = 1 ~ 32
Code of the type: HDB3
Compliant the with G.703, G.704, G.706 and G.823
75/120 optional
the BNC (75ohm) / the RJ45 (120ohm)
Transparent / fractional optional
Qty: 1
4.3 Ethernet Connections
Standard:. The IEEE 802.3, 802.3u
10 / 100M Electrical Port,
the MDI / MDIX Auto negotiation
Half / Full Duplex
the RJ45 Connector
Qty: 1
4.4 Environment
the Operation Temperature: 0 ~ 50
the Operation the Relative Humidity viewer: 20 ~ 90%
Store Temperature: -20 ~ 65
Store the Relative Humidity viewer: 10 ~ 95%
Order Information
F4-51A 10 / 100M Ethernet over 1E1 Converter, Standalone, AC220V Power Supply's
F4-51D 10 / 100M Ethernet over 1E1 Converter, Standalone, the DC-48V Power Supply's
F4-51M 10 / 100M Ethernet over 1E1 converter, Module card, AC220V / DC-48V power
V.35 & Ethernet & FE1 to E1
1.Overview
FBPC100 Series gives the interface conversion between G.703 E1 and V.35. This device provides an economical digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.FBPC100 Series is widely used in communication network, both in WAN and LAN connection field.
2.Features
Interface conversion between E1 and V.35, E1 and Ethernet
Support ITU-T V.35, G.703, G.704, G.823
Fully compatible with IEEE 802.3 and Ethernet Standards
Standalone and chassis module available, support hot-swap
Framed (N*64Kbps) and unframed (2.048Mbps) optional, support continuous and discontinuous timeslots setting
Ethernet port 10Mbps, Full/Half Duplex mode compatible
10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover
Frame mode support PCM30/ PCM31
CRC/non-CRC auto-negotiation on E1 interface
Support remote bandwidth control, and remote loop back under framed mode.
Support internal clock, E1 recovery clock or V.35 line clock
Provide local, diagnostic and remote loop back test.
For E1 interface, 75 ohm (unbalanced) and 120 ohm (balanced) available and auto-negotiation.
For V.35 interface, DCE and DTE mode are optional
Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
3.Management
Support Console, WEB and SNMP management
Provide Timing Mode Setting, Loop back mode setting, Framed or Unframed mode setting clock resources selection, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version
View & configure the working status of local and remote device, including connection status, port status
Provide user management to ensure the device operation security
4.Specifications
4.1E1 ports
Compliant with: ITU-T G.703, G.704, G.823
Rate: 2.048Mbps
Code type: HDB3
Impedance: 75 ohm unbalanced & 120 ohm balanced optional
Physical connector: BNC for unbalanced & RJ45 for balanced
4.2V.35 interface:
Compliant with V.35 standard
Rate: n×64Kbps, n=132
Physical connector: DB25 female jack
DCE & DTE optional
4.3Ethernet ports
Compliant with: IEEE802.3, 802.3u, 802.3x
Rate: 10Mbps, Half/Full auto-negotiation
Auto MDI/MDI-X
Physical connector: RJ45
4.4Environment
Operation Temperature: 0~50
Operation Relative Humidity: 0~90%
Store Temperature: -20~65
Store Relative Humidity: 0~95%
Order Information
P/N Description
F4-5516 V.35&Ethernet & FE1 to E1 protocol converter, V.35&Ethernet&FE1 share the 2Mbps bandwidth
FC-416 16 Slots Chassis, Supply two Powers
FC-416M Management Module for the FC-416 Chassis
100Base-TX/FX to 1-8 E1 Protocol Converter Series
1.Overview
F5-4511 Series F5-15XX Converter is a high performance, remote, self-learning 10/100Base-TX or 100/1000Base-FX to E1 protocol converter. This series of products are orientated in the broadband access system for its high-quality, high-stability and low price. This product can convert 10/100Base-TX or 100/1000Base-FX to single E1 line. It provides completed indicators to show the status and alarm messages of the E1 line and Ethernet ports. Its E1 data interface also provides an economical digital access solution for E1 and Fractional E1 network Services, which can work at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches. The main E1 link may be clocked from the recovered receive clock or from an internal oscillator. For easy to check the fault of network line, the device provides local loop selection. It is widely used in LAN connecting, remote monitor and video broadcasting. Furthermore, it can be managed by the software Fi-View-PC. Managed/ unmanaged optional.
2.Hardware Features
●Single E1 channels carry 100/1000Base-FX and 10/100Base-T Ethernet data
●Comply with ITU-T G.703, G.823 for E1 ports and IEEE802.3u for Ethernet ports
●Optical port supports 100 Base-FX mode. Electric ports support 10/100Base-T mode
●Ethernet port is in flow control and back pressure mode; support huge packet, up to 1916 bytes (inclusive); carrier sense based backpressure is selected
●64Mbits high-speed SDRAM inside used to cache
●Filter long/short Ethernet data package and address
●E1 channel:HDB3 code, Transparent and Fractional optional, 75/120ohm optional
●The timeslots can be selected fractionally
●The frame length is from 64 to 2024 byte; support full duplex PAUSE runoff control and Ethernet MIB data statistic
●Can select internal clock or recovered clock ; PCM30/ 31 selected
●Full LED on panel provides comprehensive indication of device working status
●220VAC and -48VDC power supply for standalone are optional
●Managed/ unmanaged optional
●Provide SNMP, WEB and Console management for the standalone. Viewing and configuring local and remote device easily.
3.Software Features (optional)
●Support Console and SNMP management, for Standalone and Chassis
●Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version
●View & configure the working status of local chassis and remote standalone device, including E1 status, Optical status
●Support remote loop back function
●Reset the system or a single module via management software
●Reset chassis to factory default
●Support online firmware upgraded
●Show the detailed information of power supplies, including AC/DC type and working status
●Monitoring chassis inside temperature, fans status, and backboard power, and with alarms indication in software
●Provide MIB file, make it easy to be integrated into the third-party SNMP management software
●Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it’s very easy and clear to manage all devices even if many chassis in one window.
Order Information
Model:
F5-4511, 100Base-TX/FX to 1-8 E1 Protocol Converter Series
P/N:
F5-1518-13-S042CA/D 1 optical port and 1 electric port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1518-33-S042CA/D 1 optical port and 3 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1518-S042C A/D 1 optical port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1513A/D 1 electric port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply
F5-1533A/D 3 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply
F5-1543A/D 4 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply
For SNMP management works on all of the series listed above.
Note: The P/Ns shown in above table are for 75ohm E1 channels only. Append suffix “-H” for each to represent 120ohm E1 channels. All of the devices listed above support SNMP management, and the manage module is optional.